曲を逆再生する方法を考えたことはありますか(Did)?曲がどのように聞こえるかを確認するためだけに曲を反転する方法を知りたいですか?おそらく、音声を逆方向に再生して、目に見えないところに隠されたメッセージを明らかにしようとしていますか?それとも、ビートルズの(Beatles)ポール(Paul)が本当に死んでいるかどうかを自分でチェックする時が来たのでしょうか?理由が何であれ、このチュートリアルは、Windowsを搭載した任意のコンピューターまたはデバイスでAudacityのオーディオを反転する方法を示しています。(Audacity)
注:(NOTE:)このガイドはWindows 11で作成されていますが、手順はWindows10でも(Windows 10)同じです。
WindowsPCまたはデバイスにAudacityをダウンロードしてインストールします
オーディオを逆再生するために最初に行う必要があるのは、Audacityというプログラムを入手することです。ここから(here)無料でダウンロードできます。

Audacityを使用してオーディオを反転させることができます
Audacityは、オーディオファイルの操作とサウンド編集の実行を支援するために設計された無料のプログラムです。これはオープンソースツールなので、誰でも完全に無料で使用できます。隠れたコスト、広告、制限は一切ありません。
Windowsデバイスと互換性のあるAudacityの最新バージョンをダウンロードしてインストールします。インストール部分は非常に単純なので、UACウィンドウで[(UAC)はい(Yes)]をクリックまたはタップして、セットアップウィザードの指示に従います。

オーディオを逆にするためにAudacityをインストールする
反転したい曲をAudacityで開きます(Audacity)
コンピュータにAudacity(Audacity)をインストールした後、 Audacityを起動してウェルカムメッセージを表示します。“Welcome to Audacity!”閉じます 窓。Audacityを開くたびにウェルカムメッセージを閉じたくない場合は、まず、[起動時にこれを再度表示しない]オプションをオンに(t show this again at startup)し(“Don)ます。」

(Get)Audacityのウェルカムウィンドウを削除します
左上隅にある[ファイル]メニューを(File)開き(Open)、[開く]をクリックまたはタップします。
ヒント:(TIP:)または、キーボードショートカットのCtrl + Oを使用することもできます。

(Press Open)Audacityのファイル(File)メニューから開くを押します
(Browse)Windowsコンピュータまたはデバイスを(Windows)参照して、反転する曲を見つけます。見つけたら、それを選択して、[開く(Open)]をクリックまたはタップします。

再生したいオーディオ(Audio)を逆方向に開きます
以下に示すように、 Audacity(Audacity)は選択した曲をすぐにロードします。
ヒント:(TIP:)曲をロードするために、曲をAudacityのウィンドウにドラッグアンドドロップ(drag and drop)することもできます。

曲を反転するには、最初にそれをAudacityにロードする必要があります(Audacity)
Audacityでオーディオを反転する方法
オーディオがAudacityにロードされたので、左上隅から[選択(Select)]メニューを開き、 [すべて(All)]をクリックまたはタップして曲全体を選択します。キーボードCtrl + Aを押しても同じ結果が得られることに注意してください。

mp3を逆にするには、最初にそれを選択します
トラック全体を選択したら、ウィンドウの上部から[効果]メニューを開き、[(Effect)反転(Reverse)]オプションを探します。クリックまたはタップします。

Audacityで曲を反転する方法
Audacityが曲の反転を終了すると、プレビューを聞くことができます。ウィンドウの左上にある再生コントロールを使用して、[再生(Play)]をクリックまたはタップします。

Audacityで曲を逆再生する方法
結果が気に入ったら、このチュートリアルの次のステップに進んで、反転した曲を保存します。
反転した曲を保存する
Audacityを使用せずに、反転した曲を別のメディアプレーヤーで再生する場合は、新しいオーディオファイルを保存する必要があります。[ファイル(File)]メニューをもう一度開き、 [エクスポート]に移動して、[(Export)オーディオ(Export Audio )のエクスポート]オプションをクリックまたはタップします。

オーディオのエクスポートを選択
Audacityは、オーディオのエクスポート(Export Audio)ウィンドウを開きます。このウィンドウでは、コンピューターのどこに曲を保存するか、その名前、フォーマット、およびエンコードを選択できます。適切と思われる場所と名前を選択しますが、使用するファイルの種類とエンコーディングにもう少し注意を払ってください。あなたがすることができる最も安全な賭けは、デフォルトで行くことです:タイプとしてのWAV(Microsoft)と(WAV (Microsoft) )「署名された16ビットPCM」(“Signed 16 bit PCM”)エンコーディング。結果は、オペレーティングシステムのバージョンに関係なく、すべてのWindowsコンピューターで機能しますが、欠点として、かなり大きなファイルが得られます。ただし、別のファイル形式を使用するには、システムに適切なオーディオコーデックもインストールする必要がある場合があります。完了したら、[保存(Save)]ボタンをクリックまたはタップします。

反転した曲を保存する方法
結果を保存する前に、Audacityでは(Audacity)メタデータ(metadata)を編集できます。必要に応じて変更を加え、[ OK(OK) ]をクリックまたはタップします。

反転した曲の保存を終了します
Audacityは、指定した場所に新しい反転形式で曲を保存します。
どの曲を逆にしましたか、そしてその理由は何ですか?
これで、お気に入りのメディアプレーヤーを使用して、結果のオーディオを再生できます。ポピュラー曲に隠された(もっと)メッセージを聴きたい場合は、このバックマスクされたメッセージのリストを(List of backmasked messages)チェックしてください。このガイドを閉じる前に、逆方向に再生したいオーディオとその理由を知りたいと思います。コメントで教えてください。
How to use Audacity to reverse audio in Windows -
Did you ever wonder how to play a song backwаrds? Do you want to know how to reverse a song just to see what it would sound like? Perhаps you’re trуіng to play audio backwаrds to reveal messages hidden away in plain sіght? Or maybe it’s time to check for yourself whether Paul from Τhe Beatles is really dead? Whatever the reason, this tutorial illustrates how to reverse audio in Audacity on any computer or device with Windowѕ:
NOTE: This guide is created in Windows 11, but the steps are the same in Windows 10.
Download and install Audacity on your Windows PC or device
The first thing you need to do in order to play audio backwards is to get a program called Audacity. You can find it as a free download here.

You can use Audacity to reverse audio
Audacity is a free program designed to help you work with audio files and perform sound editing. It’s an open-source tool, so it’s completely free for anyone to use. There are no hidden costs, no advertisements, and no limitations whatsoever.
Download the latest version of Audacity compatible with your Windows device, and then install it. The installation part is very simple, so just click or tap Yes in the UAC window and follow the instructions in the setup wizard.

Install Audacity to reverse audio
Open the song you want to reverse in Audacity
After installing Audacity on your computer, launch it to see a welcome message. Close the “Welcome to Audacity!” window. If you don’t want to close the welcome message each time you open Audacity, first, check the option “Don’t show this again at startup.”

Get rid of the welcome window in Audacity
Open the File menu in the top-left corner, and then click or tap on Open.
TIP: Alternatively, you can also use the keyboard shortcut Ctrl + O.

Press Open from Audacity's File menu
Browse through your Windows computer or device to locate the song you want to reverse. When you find it, select it and click or tap on Open.

Open the Audio you want to play backwards
Audacity immediately loads the selected song, as seen below.
TIP: You can also drag and drop a song onto Audacity’s window in order to load it.

To reverse a song, you first have to load it into Audacity
How to reverse audio in Audacity
Now that your audio is loaded in Audacity, open the Select menu from the top-left corner, and then click or tap on All to select the entire song. Note that you can achieve the same result by pressing Ctrl + A on your keyboard.

To reverse an mp3, select it first
Once the whole track is selected, open the Effect menu from the top of the window and look for the Reverse option. Click or tap on it.

How to reverse a song in Audacity
When Audacity finishes reversing the song, you can listen to a preview. Use the playback controls from the top left part of the window to click or tap on Play.

How to play a song backwards in Audacity
If you like the result, go to the next step of this tutorial to save your reversed song.
Save the reversed song
If you want to play the song you reversed with another media player without using Audacity, you should save the new audio file. Open the File menu again, go to Export, and then click or tap on the Export Audio option.

Choose to Export Audio
Audacity opens the Export Audio window that lets you select where to save the song on your computer, its name, format, and encoding. Choose the location and name as you see fit, but pay a bit more attention to the file type and encoding you want to use. The safest bet you can make is to go with the defaults: WAV (Microsoft) as type and “Signed 16 bit PCM” encoding. The result works on any Windows computer, no matter the version of the operating system, but, as a downside, you get a pretty large file. However, to use another file format, you might find that you must also install the appropriate audio codecs on your system. When you’re done, click or tap on the Save button.

How to save a reversed song
Before saving the result, Audacity lets you edit its metadata. Make any changes you want, and then click or tap on OK.

Finish saving the song you reversed
Audacity saves your song in its new reversed form at the location you specified.
What song did you reverse and why?
You can now use your favorite media player to play the resulting audio. If you want to listen to (more) messages hidden in popular songs, you can check out this List of backmasked messages. Before you close this guide, we’re curious what audio you wanted to play backwards and why. Let us know in the comments.