ポインターが画面上を素早く移動しすぎたり、カーソルの色が原因で見つけにくくなったり、誤ってアプリを拡大したりする可能性があります。Mac の(Mac)カーソルとマウス ジェスチャをカスタマイズして、見た目や動作を好みに合わせる
ことができます。
代わりにトラックパッドのジェスチャに興味がある場合は、macOS でトラックパッドをカスタマイズする(customize the trackpad on macOS)方法を参照してください。
注: カスタマイズの一部は、Magic Mouse の使用を(using a Magic Mouse)前提としています。

マウスの速度を変更する
マウスを動かすと、ポインターの動きが速すぎてぼやけてしまいますか? 一方で、動きが非常に遅いため、追いつくのを待って指でタップすることもあります。マウス使用時のカーソルの追跡速度を変更できます。
- Dockのアイコンまたはメニュー バーのAppleアイコンを使用して、(Apple)システム設定(System Settings)を開きます。左側の「マウス」を選択します。(Choose Mouse)macOS Ventura(Ventura)より前の古いオペレーティング システム バージョンでは、マウス設定は[システム環境設定](System Preferences)にあります。
- 右側で、「ポイント(Point)&クリック」(Click)を選択します。
- トラッキング(Tracking)速度スライダーを使用して、カーソルの移動速度を調整します。

スライダーを 1 クリックずつ動かし、マウスを動かして速度を確認してください。
マウスの(Left Mouse Buttons)右ボタン(Right)と左ボタンを切り替える
マウスのボタンを交換する最も一般的な理由の 1 つは、左手で使用するためです。これにより、主 (右) ボタンが人差し指で簡単に届く位置に配置され、副ボタンが左側に配置されます。これは macOS での簡単な変更です。
- [システム設定](System Settings)を開き、[マウス](Mouse)を選択します。
- 「ポイント&クリック」を選択します。
- [セカンダリ(Secondary)クリック]の横にあるドロップダウン メニューを使用して、[クリック左側](Click Left Side)を選択します。

次に、マウスのボタンを試してください。マウスの右ボタンをプライマリ、左ボタンをセカンダリとして設定する必要があります。
マウスの中心をどう使うか迷っていますか? Mac のマウスまたはトラックパッドを使用して
中クリックする方法を(how to middle-click)確認してください。
ポインタの色を変更する
カーソルの色は基本的な黒で問題ありませんが、より目立つ色やお気に入りの色が必要な場合もあります。はい、macOS ではポインターの色をほぼ任意の色に変更できます。
- [システム設定](System Settings)を開き、[アクセシビリティ](Accessibility)を選択します。
- 「ビジョン」の下で「ディスプレイ」を選択します。

- (Move)下部の「ポインター」セクションに(Pointer)移動します。
- (Pick)[ポインターの(Pointer)輪郭の色] および/または[ポインターの(Pointer)塗りつぶしの色]
の右側にある色ボタンを選択して、一方または両方を変更します。

- [カラー](Colors)ボックスが開くと、上部のタブを使用して、基本色、スペクトル、または色鉛筆の色合いから選択できます。

カスタム カーソルの色を使用する
アプリでも Web ページでも、画面上の色を使用してカスタム カラーを選択することもできます。
- [カラー](Colors)ウィンドウの下部にあるスポイトを選択して、画面上の色を選択します。次に、カーソルを色に移動してクリックします。

- 新しいカーソルの色がパレットの下部とポインターに表示されます。

- 完了したら、左上の [X] を使用して
[カラー]ボックスを閉じます。(Colors)
ヒント: 黒の塗りつぶしと白の輪郭を使用するデフォルト設定に戻す場合は、[Settings > Accessibility > Displayに戻り、 [ポインター](Pointer)セクションで[色(Colors)のリセット](Reset) を選択します。
ポインタのサイズを調整する
カーソルを見やすくするために、色だけでなくサイズも変更できます。これは、ポインタをより大きく、よりシンプルにできるため、年配の友人や家族のために
Macをセットアップする場合にも役立ちます。
- [システム設定](System Settings)を開き、[アクセシビリティ](Accessibility)を選択します。
- ビジョンの下で、ディスプレイを選択します。
- 「ポインター」(Pointer)セクションの下部に進みます。
- [ポインター(Pointer)サイズ]の横にあるスライダーを使用して、カーソルの大きさを選択します。

ポインターの速度を変更するのと同様に、[設定] を閉じる前に、スライダーを一度に 1 クリックずつ移動して、カーソル サイズがどの程度適切に機能するかを確認できます(Settings)。
シェイク(Shake)をオンにしてポインタを見つける
ポインターを(spot your pointer)すばやく見つけるもう 1 つの方法は、シェイクして位置(Shake)を特定する機能を使用することです。これは、コンピュータから離れて、戻ったときにカーソルをどこに置いたかわからない場合に便利です。
マウスを左右に振ると、カーソルが一瞬大きく表示され、見つけやすくなります。
- [システム設定](System Settings)を開き、[アクセシビリティ](Accessibility)を選択します。
- [ビジョン] の下で、[ディスプレイ] を選択します。
- 「ポインター」セクションに進みます。
- マウスポインタを振って(Shake)位置を特定するためのトグルをオンにします。

それから、試してみてください。マウスを左右に素早く振ると、ポインタが見つかるはずです。
スマートズームを有効または無効にする
Mac用のMagic Mouse を(Magic Mouse)お持ちの場合は、 Smart Zoomと呼ばれるアプリでズームインするための便利な機能があります。この機能をオンにすると、マウスを 1 本の指でダブルタップしてズームインできます。
一部の人にとっては便利ですが、他の人にとっては迷惑になる可能性があります。スマートズームを(Zoom)有効または無効にする方法は次のとおりです。
- [システム設定](System Settings)を開き、[マウス](Mouse)を選択します。
- 「ポイント&クリック」を選択します。
- [スマート(Smart)ズーム]の横にあるトグルを使用して、機能をオンまたはオフにします。青(Blue)(または別のアクセントカラー) はオンを意味し、グレーはオフを意味します。

オンにするかオフにするかに関係なく、マウスの上部を軽くダブルタップして、スマート ズームを(Smart Zoom)使用するかどうかを確認してください。
他のマウス ジェスチャをカスタマイズする
上記に加えて、カーソルとマウスのカスタマイズ オプションがさらに増えています。System Settings > Mouseに移動し、次のオプションを使用してマウスの動作を変更します。
自然なスクロール: この設定を有効にすると、スクロール時にマウスが指の動きを追跡し、同じ方向に移動します。

ページ間をスワイプ(Swipe): ドキュメント内のページ間を移動する方法の設定を選択します。1 本の指で左右にスクロール、2 本の指で左右にスワイプ、1 本または 2 本の指でスワイプ、または設定をオフにすることができます。

(Swipe)全画面アプリケーション間で
スワイプ: この設定を有効にすると、2 本の指で左右にスワイプして全画面モードでアプリ間を切り替えることができます。
Mission Control : 2 本の指でダブルタップして
Mission Controlを開くには、この設定を有効にします。

簡単な変更で大きな違い(Difference)が生まれます
いくつかの簡単な変更を加えることで、マウスまたはポインターの動作を改善できます。ほんの小さな調整でもエクスペリエンスを向上させることができます。基本的な色の変更でも、ページ間の簡単なスワイプでも、わずか数ステップで
Macのマウスとカーソルをカスタマイズできます。
さらに詳しくは、コンピューターの
生産性を向上させるためにマウスとトラックパッドを使用する方法をご覧ください。(mouse versus a trackpad for better productivity)
How to Customize the Cursor and Mouse on Mac
Maуbe your pоinter zips across the screen too fast, the cursor сolor makes it hard to find, or you acсidentally zoom in on apps. Yoυ can customize the Mac сursor and mouse gestures to look and behave аs yоu like.
If you’re interested in trackpad gestures instead, look at how you can customize the trackpad on macOS.
Note: Some of the customizations assume you’re using a Magic Mouse.

Change the Mouse Speed
When you move your mouse, does the pointer move so fast it’s just a blur? On the other hand, maybe it moves so slow that you tap your fingers waiting for it to catch up. You can change the tracking speed of the cursor when using your mouse.
- Open System Settings using the icon in your Dock or Apple icon in the menu bar. Choose Mouse on the left. On older operating system versions before macOS Ventura, you’ll find your mouse settings in System Preferences.
- To the right, select Point & Click.
- Use the Tracking speed slider to adjust how fast or slow the cursor moves.

Try moving the slider one click at a time and then checking the speed by moving your mouse.
Switch the Right and Left Mouse Buttons
One of the most common reasons to swap the mouse buttons is for left-handed use. This places the primary (right) button in easy reach of your index finger with the secondary button to the left. This is a simple change on macOS.
- Open the System Settings and choose Mouse.
- Select Point & Click.
- Next to Secondary click, use the drop-down menu to pick Click Left Side.

Then, give your mouse buttons a try. You should have the right mouse button as the primary and the left as the secondary.
Wondering how to use the center of your mouse? Check out how to middle-click using your Mac mouse or trackpad.
Change the Pointer Color
While there’s nothing wrong with basic black for your cursor color, maybe you want something more prominent or even your favorite color. Yes, you can change the pointer color on macOS to almost anything you want.
- Open the System Settings and choose Accessibility.
- Below Vision, select Display.

- Move toward the bottom to the Pointer section.
- Pick the color button to the right of Pointer outline color and/or Pointer fill color to change one or both.

- When the Colors box opens, you can use the tabs at the top to pick from a basic color, the spectrum, or shades of colored pencils.

Use a Custom Cursor Color
You can also pick a custom color using a color on your screen, whether in an app or on a web page.
- Select the eyedropper at the bottom of the Colors window to choose a color on your screen. Then, move the cursor to the color and click.

- The new cursor color appears in the palette at the bottom and on your pointer.

- When you finish, close the Colors box using the X on the top left.
Tip: If you want to return to the default settings using a black fill and white outline, return to Settings > Accessibility > Display and select Reset Colors in the Pointer section.
Adjust the Pointer Size
To make the cursor easier to see, you can change not only the color but the size as well. This is also helpful if you’re setting up a Mac for an elderly friend or family member because you can make the pointer larger and simpler.
- Open the System Settings and choose Accessibility.
- Beneath Vision, select Display.
- Go toward the bottom of the Pointer section.
- Use the slider next to Pointer size to choose how large or small to make the cursor.

Like changing the pointer speed, you can move the slider one click at a time to see how well the cursor size works for you before you close the Settings.
Turn on Shake to Locate the Pointer
Another way to quickly spot your pointer is using the Shake to Locate feature. This is handy if you step away from your computer and aren’t sure where you left your cursor when you return.
You can shake your mouse from side to side to make the cursor appear large for a brief moment, making it easy to find.
- Open the System Settings and select Accessibility.
- Below Vision, choose Display.
- Head to the Pointer section.
- Turn on the toggle for Shake mouse pointer to locate.

Then, give it a try — shake your mouse from side to side quickly and you should spot your pointer.
Enable or Disable Smart Zoom
If you have a Magic Mouse for your Mac, there is a convenient feature for zooming in on an app called Smart Zoom. With this feature turned on, you can double-tap your mouse with one finger to zoom in.
While convenient for some, it can be annoying to others. Here’s how to enable or disable Smart Zoom.
- Open the System Settings and choose Mouse.
- Select Point & Click.
- Next to Smart zoom, use the toggle to turn the feature on or off. Blue (or another accent color) means on and gray means off.

Whether you turn it on or off, give your mouse a nice double-tap on the top and see how you like using or not using Smart Zoom.
Customize Other Mouse Gestures
Along with the above, there are more customization options for your cursor and mouse. Go to System Settings > Mouse and use the following options to change how your mouse behaves.
Natural scrolling: Enable this setting to have your mouse track your finger movement when scrolling and then move in the same direction.

Swipe between pages: Choose a setting for how to move through pages in a document. You can scroll left and right with one finger, swipe left and right with two fingers, swipe with one or two fingers, or turn the setting off.

Swipe between full-screen applications: Enable this setting to swipe left and right with two fingers to switch between apps in full-screen mode.
Mission Control: Enable this setting to open Mission Control by double-tapping with two fingers.

Simple Changes Can Make All the Difference
You can improve how your mouse or pointer works with a few simple changes. Even tiny tweaks can enhance your experience. Whether it’s a basic color change or an easy swipe between pages, you can customize your Mac mouse and cursor in just a few steps.
For more, look at using a mouse versus a trackpad for better productivity on your computer.