ラップトップのバッテリーレベルが20%を下回ったら、充電器を入手して接続します。しかし、何も起こらない場合はどうでしょうか。
この投稿では、充電器が接続されていてもラップトップが充電されていないときに何ができるかを見てみましょう。こうすることで、慌ててラップトップが道の終わりに到達したと考える必要がなくなります。

接続を再確認してください
何かをする前に、実際(actually )に充電器をラップトップに接続していることを確認してください。この間違いは、急いでいる場合に発生する可能性があります。
したがって、すぐに反応するのではなく、ラップトップの充電器がラップトップに接続されているかどうかを確認してください。次に、充電器の接続に使用したコンセントが正常に機能しているかどうかを確認します。
また、この記事に記載されているいくつかの修正に関する短いビデオ(posted a short video)を投稿したYouTubeチャンネルも必ずチェックしてください。
バッテリーを取り外します
ラップトップが実際に接続されていても充電されていない場合は、バッテリーが原因である可能性があります。もしそうなら、その完全性について学びます。
取り外し可能な場合は、取り出して電源ボタンを約15秒間押します(押し続けます)。これにより、ラップトップから残りの電力が排出されます。
次に、ラップトップの電源ケーブルを接続して、デバイスの電源を入れます。これを行うときは、ラップトップのバッテリーがまだ画像の外にあることを確認してください。

この設定により、電源アダプタに問題があるかどうかを判断できます。ラップトップの電源が正しくオンになっている場合は、電源アダプターも正常に機能していることを意味します。したがって、問題はバッテリーにあります。
お尻のバッテリーを扱っている可能性があります。ソリューション?バッテリーを取り付け直してください!
Macユーザーもこのソリューションを利用できます。ただし、問題は、ラップトップ(ほとんどの
Mac(Macs)と同様)の下部にバッテリー用のコンパートメントが表示されていない可能性があることです。この場合、ラップトップを安全に開いてバッテリーを取り外す方法を見つける必要があります。
更新されたドライバーを使用する
問題がバッテリーにない場合は、ドライバーにある可能性があります。開始するには、Windowsキーを押してコントロールパネル(Control
Panel)を開きます。

ハードウェアとサウンドを(Hardware and Sound)選択します。

また、[デバイスとプリンター]で、[(Devices and Printers)デバイスマネージャー(Device Manager)]を選択します。

バッテリー(Batteries)を選択します。

まず、MicrosoftACアダプタ(Microsoft AC Adapter)に移動します。それを右クリックして、[ドライバーの更新(Update driver)]を選択します。

次に、MicrosoftACPI準拠の制御方式バッテリーに進み(Microsoft ACPI-Compliant Control Method
Battery)ます。それを右クリックし、[ドライバの更新(Update driver)]も選択します。

更新が完了したら、ラップトップを再起動して充電器を接続します。今は大丈夫なはずです。
それ以外の場合は、製造元のWebサイトにアクセスして、ドライバーを入手してください。必ず公式Webサイトにアクセスし、最新バージョンのドライバーをダウンロードしてください。
電源とスリープの設定を確認する
設定にも問題がある可能性があります。Windows 10デバイスでこれを確認するには、次のことを行う必要があります。
Windowsキーを押して、[設定](Settings)を起動します。

[システム(System)]を選択します。

そして、パワー&スリープ(Power & sleep )カテゴリを開きます。

[関連設定](Related settings)で、[追加の電源設定](Additional power settings)を開きます。

そこで、[プラン設定の変更](Change plan settings)を選択します。

次に、正しい設定が適用されていることを確認します。

設定の変更を有効にするには、[変更を保存(Save
changes)]をクリックします。

Macを使用している場合は
、これも利用できます。まず(First)、[システム環境設定]に移動し、 (System Preferences )[省エネ(Energy
Saver)]を開きます。

そこで、適切な設定を適用します。

外部の助けを求める
上記の解決策のいずれも機能しなかった場合は、外部の支援を取り入れることができます。あなたの問題を彼らに知ら(Inform)せて、あなたのラップトップの特定のモデルを含めることを忘れないでください。

この時点で、ハードウェアの問題である可能性があります。ラップトップの電源アダプターに問題があるか、コンピューターの電源ポートが機能していません。予備のアダプターが見つかった場合は、最初に電源アダプターを除外するのが最善です。
問題はラップトップに固有のものである可能性があります。もしそうなら、経験豊富な技術サポート(experienced tech support)があなたを助ける資格があります。
Laptop Plugged In, but Not Charging?
When your
laрtop’s battery level is below 20%, it’s time to get the charger and plug it
in. But what if nothіng happens?
In this post,
let’s look at what you can do when your laptop is not charging even though the
charger is plugged in. This way, you won’t have to panic and start thinking
that your laptop has hit the end of the road.

Double-check the connection
Before you do
anything, make sure you actually plugged
in the charger to your laptop. This mistake can happen if you’re on a rush.
So rather than react immediately, check whether your laptop’s charger is connected to your laptop. Then check if the outlet you used to plug in your charger is working fine.
Also, be sure to check out our YouTube channel where we posted a short video on some fixes mentioned in this article.
Remove Battery
If your laptop is
actually plugged in and yet it is still not charging, the battery might be the
culprit. If so, learn about its integrity.
If it’s
removable, take it out and press (and hold down) the power button for around 15
seconds. What this will do is drain the remaining power from your laptop.
And then plug in
your laptop’s power cable and turn the device on. As you do this, make sure the
laptop battery is still out of the picture.

With this set up,
you can tell if there is something wrong with your power adapter. If your
laptop turns on properly, it means your power adapter is also working properly.
And therefore, the problem is with your battery.
It’s possible
that you’re dealing with a bum battery. The solution? Re-install the battery!
Mac users can go
with this solution, too. An issue, however, is that your laptop (just like most
Macs) might not have a visible compartment for the battery on the bottom. In
this case, you’ll have to figure out a way to safely open your laptop and
remove the battery.
Use Updated Drivers
If the problem is
not with your battery, then it might be with your drivers. To kick things off,
hit the Windows key and open Control
Panel.

Select Hardware and Sound.

And under Devices and Printers, select Device Manager.

Select Batteries.

First, go to Microsoft AC Adapter. Right-click on it
and select Update driver.

Now, move on to Microsoft ACPI-Compliant Control Method
Battery. Right-click on it and also select Update driver.

Once you’re
finished with the updates, reboot your laptop and plug in your charger. It
should be okay now.
Otherwise, head
on over to the manufacturer’s website to get the drivers. Make sure you go to
the official website and make sure that you download the latest versions of the
drivers.
Check Power & Sleep Settings
The problem might
also be with your settings. To check this on a Windows 10 device, here’s what
you need to do.
Hit the Windows
key and launch Settings.

Select System.

And open the Power & sleep category.

Under Related settings, open Additional power settings.

There, select Change plan settings.

Then see to it
that the right settings are applied.

For any changes
in the settings to take effect, click Save
changes.

If you’re using a
Mac, you can also get to this, too. First, go to System Preferences and open Energy
Saver.

There, apply the
proper settings.

Seek Outside Help
If none of the solutions above worked, then it’s time for you to bring in outside assistance. Inform them of your issue and don’t forget to include the particular model of your laptop.

At this point, it’s most likely a hardware issue. Either the laptop power adapter is having a problem or the power port on the computer is no longer working. If you can find a spare adapter, it would be best to rule out the power adapter first.
It’s possible
that the problem is unique for your laptop. And if so, an experienced tech support is qualified to help you out.